Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Tallahassee?
Chimney repair in Tallahassee typically runs $180 to $5,000, with most common jobs falling between $250 and $1,200. A crown patch or a cap replacement sits at the low end, while a full stainless-steel reline with DuraFlex is the big-ticket item. The written estimate sets your final price, and we give that estimate free.
We handle sweeping, repair and inspection in-house, so you’re not juggling two or three contractors to get one chimney back in working order. Every job starts with an inspection, because a repair you can quote honestly is a repair you can see. Call (855) 904-4110 to set one up. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most chimney repairs in Tallahassee land between $250 and $1,200.
- A full reline is the biggest line item, usually $2,500 to $5,000.
- Masonry crown and wash repairs cost far less than a rebuild and prevent bigger damage.
- We use professional-grade brands: HeatShield for resurfacing, DuraFlex for liners, Gelco and Famco for caps and venting.
- Our technicians have up to 14 years of experience, and inspections are documented formally for insurance and real estate records.
Chimney Repair Cost Breakdown (2026)
These are the typical ranges homeowners in Tallahassee see for the repair work we do. They’re estimates for planning, not a quote. The final number comes from the written estimate after we’ve looked at your flue and firebox.
| Repair | Typical Cost Range |
|---|---|
| Crown repair or rebuild | $350 – $1,200 |
| Chimney cap (Gelco or Famco) | $180 – $450 |
| Damper replacement | $250 – $650 |
| Flue tile / firebox crack repair | $300 – $900 |
| HeatShield ceramic liner resurfacing | $1,200 – $2,800 |
| DuraFlex stainless-steel reline | $2,500 – $5,000 |
| Flashings and chase cover repair | $250 – $800 |
| Full chimney rebuild (upper sections) | $4,000 – $9,000+ |
A few things push the range up or down. The big driver is whether the flue itself is sound. If a liner has cracked or deteriorated, resurfacing it with HeatShield or dropping in a DuraFlex liner is not optional, because a compromised flue is the part of a chimney that actually keeps fire and gases where they belong. Caps, dampers and crowns are comparatively cheap fixes, and they’re usually the ones doing the most to keep water and animals out. The other driver is height and access: a two-story chase takes more setup and safety work than a single-story one, and that shows in the estimate.
What Affects Chimney Repair Pricing in Tallahassee
Chimney repair quotes in Tallahassee move on a handful of facts we look at during the inspection. Here’s what changes the number.
- Liner condition. A cracked or spalled liner is the costliest thing we find, because restoring it means HeatShield resurfacing or a full DuraFlex reline. A liner that’s still solid keeps the repair small.
- Chimney height and roof access. Tall chases and steep roof pitches need more staging and safety rigging, which adds labor time. That’s a real line item, not padding.
- Water damage from big seasonal rain. Tallahassee gets heavy summer thunderstorms and plenty of annual rain. A failed crown, missing cap or worn flashing lets water into the masonry, and by the time it shows up inside the house the repair has usually grown.
- Type of fuel. A wood-burning fireplace sees more creosote and soot in the flue, while a gas appliance has its own venting requirements. The repair scope differs between the two.
- Whether it’s crumbling mortar or a cracked tile. Repointing and masonry repair cost less than chasing a hidden crack, but hidden cracks need the right product, not a smear of generic mortar.
- Whether a repair or a rebuild is warranted. A damaged crown or a short section of brick can be fixed. Structural failure in the upper chase may need a rebuild, and that’s when the price jumps into four figures.
Why We Quote Repair the Way We Do
Chimney repair isn’t a general masonry job you hand to whoever’s doing the roof. It’s fire and gas containment. That’s why we treat the flue liner as the heart of the job. When a liner is compromised, we restore it with the HeatShield ceramic system or line the flue with DuracFlex flexible stainless steel, both professional-grade products built for this purpose. When a cap is needed, we fit Gelco and Famco components that say on the chimney for years, not improvised hardware from a hardware store that rusts out in one season.
We work exclusively with a set portfolio of brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. These are the lines used by certified chimney professionals nationwide, and using them is the difference between a repair that lasts and a repair you’re repeating next year.
Before we recommend a repair, we inspect. That inspection documents the condition of your system formally, which matters if you recently bought the home, if your insurer is asking, or if you’re selling and need records. If your flue is sound and the issue is creosote buildup or a dirty firebox, that’s a different job altogether, and we’ll explain the difference plainly.
How to Save on Chimney Repair
The cheapest chimney repair is the one you catch early. Water is the slow enemy around here, and a small leak under a missing cap or a cracked crown keeps spreading until the brick and liner are soaked. Fix the small stuff when it’s small. An annual Tallahassee chimney sweep and inspection is what catches those problems before they become a five-thousand-dollar reline. Bundling a sweep with the repair visit often makes sense, so ask about that when you call.
Ask for a written estimate and read what’s included. A good repair estimate should name the products, the section of the chimney, and whether it covers the interior firebox and the exterior chase. Getting the scope right the first time avoids the worst cost of all, a second visit. And keep your inspection report on hand. Insurers and home inspectors value a documented system, and it can spare you re-inspection when you sell.
We keep estimates free, so there’s no reason to guess at a price. Call (855) 904-4110 and we’ll get the inspection booked. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do I Need a Repair or a Rebuild?
Most chimneys need a targeted chimney repair, not a rebuild. A rebuild is warranted when the masonry is failing through a structural section, not when a crown or a tile needs attention. During the inspection we distinguish between cosmetic wear and fire-containment failure, and we quote accordingly. We won’t recommend a rebuild you don’t need, and we won’t tell you a repair will fix a liner that’s already compromised.
Can You Fix It the Same Day?
Some repairs can be handled the same day; cap replacement, damper work and minor crown patching fall into that group. A reline or a resurfacing job is usually scheduled, because the flue has to be prepped and the right liner sized. When you call, we’ll tell you honestly what’s same-day and what needs scheduling, based on what the inspection finds. We don’t promise a same-day reline we can’t deliver.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Tallahassee?
Most chimney repairs in Tallahassee cost between $250 and $1,200. Small jobs like a cap or damper sit near the bottom, while a full reline with DuraFlex or a HeatShield resurfacing can reach $2,500 to $5,000. For an exact figure, call (855) 904-4110 – estimates are free.
How much does chimney relining cost?
A chimney reline typically costs $2,500 to $5,000, and resurfacing a liner with HeatShield runs about $1,200 to $2,800. The price depends on flue length, liner size and access. Call (855) 904-4110 for a quote based on your flue.
Is it cheaper to repair or replace a chimney?
Repair is almost always cheaper than a rebuild. A rebuild of the upper chase can run $4,000 to $9,000 or more, while a targeted repair of a crown, cap or firebox stays under $1,200. The right call depends on how much of the masonry is failing. Call (855) 904-4110 and we’ll inspect and tell you which one you actually need.
Can you come today?
Yes, for many repairs. Cap, damper and minor crown work can often be handled same-day. Relining and resurfacing get scheduled. Call (855) 904-4110. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Does the repair cost more with a wood-burning fireplace?
The fuel type changes the scope, not the price we set. Wood-burning appliances tend to build up more creosote and soot, which can mean a sweep in addition to the repair. Gas appliances have their own venting requirements. Either way, the written estimate names the work and sets the price. Call (855) 904-4110 to book.
Contact Us for a Free Estimate
If you’ve noticed smoke coming back into the room, a smell that lingers, crumbling mortar, or a stain on the ceiling near the chase, don’t put it off. Those are the signs our inspection is designed to catch, and catching them early is what keeps a repair small. We’re a chimney-only specialist, so sweeping, repair and inspection all run through one call, using DuraFlex, HeatShield, Gelco and the rest of our professional-grade portfolio. Our technicians have up to 14 years of experience, and every estimate is free and written. Call (855) 904-4110 today. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Tallahassee market as of 2026. Tallahassee Chimney Sweep offers free estimates – call (855) 904-4110.
Written by the team at Tallahassee Chimney Sweep.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Matt Ackerman"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Lamont Ingram"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Dana Sutton